Introduction and Product Features
A peanut huller is a machine that uses a high-speed rotating body to remove the outer shell of peanuts while keeping them intact.
1. Clean shelling, high productivity, and high cleanliness are required for shelling machines with cleaning devices.
2. Low loss rate and low breakage rate The structure is simple, reliable to use, easy to adjust, with low power consumption, and has a certain degree of universality. It can remove multiple crops to improve the utilization rate of the machinery.
2. Requirements for peanuts (peels). Peanuts are suitable for both dry and wet conditions. If they are too dry, the breakage rate will be high, while if they are too wet, it will affect work efficiency.
3. In winter, before molting, spray about 10 kilograms of warm water evenly on 50 kilograms of fruit peels, cover with plastic film for about 10 hours, and then air dry in the sun for about 1 hour to start molting. In other seasons, cover with plastic film for about 6 hours, and the rest is the same.
4. Dry peanuts (skin fruits) can be soaked in a large pool of water, immediately removed and covered with plastic film for about 1 day, and then dried in the sun until the dryness and wetness are suitable before starting to shell.
5. Requirements for voltage and selection of workplace. Single phase electric motors are scattered in households, and the wires and circuits used are not very standardized, resulting in insufficient voltage for users who are far away from transformers. Therefore, workplaces should choose places closer to transformers.
Working principle
The peanut huller consists of a frame, fan, rotor, single-phase motor, screen mesh (available in two sizes), feeding hopper, vibrating screen, V-belt pulley and its transmission V-belt. After the machine is running normally, the peanuts are fed into the hopper in a quantitative, uniform, and continuous manner. Under the repeated impact, friction, and collision of the rotor, the peanut shells are broken. Under the rotational wind pressure and impact of the rotor, peanut kernels and broken peanut shells pass through a sieve with a certain aperture (a large aperture sieve is used for the first dehulling of peanuts, and a small aperture sieve is used for the second dehulling of small skinned fruits after cleaning). At this time, the peanut shells and kernels are subjected to the blowing force of the rotating fan, and the lightweight peanut shells are blown out of the machine. The peanut kernels are screened through a vibrating sieve to achieve the purpose of cleaning.
Folding editing requirements for this paragraph
Three Requirements for Folding Shelling Machine
1) Clean shelling, high productivity, and high cleanliness are required for shelling machines with cleaning devices.
2) Low loss rate and low breakage rate.
3) The structure is simple, reliable to use, easy to adjust, with low power consumption, and has a certain degree of universality. It can remove multiple crops to improve the utilization rate of the machinery.
Two requirements for folding peanuts
Peanuts are suitable for both dry and wet conditions, but if they are too dry, the breakage rate will be high; Excessive humidity can affect work efficiency. Peanuts (skin fruits) stored in rural areas are generally relatively dry. To make them suitable for dryness and wetness, the following methods can be used.
1) Shed in winter. Before peeling, spray about 10kg of warm water evenly on 50kg of fruit skin, cover it with plastic film for about 10 hours, and then cool it in the sun for about 1 hour to start peeling. In other seasons, cover it with plastic film for about 6 hours, and the rest is the same.
2) Dry peanuts (skin) can be soaked in a large pool of water, immediately removed and covered with plastic film for about 1 day, then cooled in sunlight until the dryness and wetness are suitable before starting to shell.
Folding usage requirements
Transformers are scattered among households, and the wires and circuits used are not very standard, resulting in insufficient voltage for users who are far away from transformers. Therefore, workplaces should choose places closer to transformers.
Folding precautions
With the widespread application of peanut machinery and the continuous development of the market, the application of peanut hullers has also been widely used. However, due to the fact that many users do not have a good grasp of the correct use of machinery, problems may arise after a period of use, or the performance of the machinery itself may not be fully utilized. Indirectly causing a decrease in mechanical efficiency and seriously affecting the economic and social benefits of the enterprise. So the correct use of peanut huller is something we must master. Here are some key points to note when using it:
1、 Before use, we must thoroughly inspect the various sturdy parts of the machinery, including whether they are still flexible in the rotating parts and whether there is enough lubricating oil in each bearing. We also need to place the machinery smoothly on the ground.
2、 It's best to check the power switch before use.
3、 After mechanical start-up, the direction of rotation of the mechanical rotor should be consistent with the opposite direction indicated on the machine. We can first experiment and observe whether it is normal.
4、 During operation, peanut fruits should be evenly and appropriately fed, avoiding the presence of impurities such as iron filings and stones.
5、 After using the machinery for a period of time, we must thoroughly clean it and remove any dirt and grime on its surface, including any remaining particles inside the machinery, before stopping use. Machinery must be stored in a relatively dry place and away from direct sunlight. And we must remember to remove the belt for storage.
Phone：0086-18695800088 
Mobile/Whatsapp 0086-18695800088 